Importers of Bio-cleaner Wastewater Treatment Plants manufactured in the Czech Republic by Envi-pur Ltd.
for further information contact Bill Martin - Glengall, Ballingarry, Thurles, Co. Tipperary Tel/Fax 052 54165 Mob. 086 3822841 - email - billmartin@esatclear.ie
BIO CLEANER BC4 - 15 P.E.
Certified to EU Standard “EN 12566-3”.
ISO Certified with CE mark and 2 YEAR WARRANTY
2 YEARS WARRANTY
Introduces new types of waste water treatment plants
This new type of the BIO CLEANER treatment plant is another important step in this technology. The BIO CLEANER waste water treatment plant proudly entered the new millennium. The BIO CLEANER family is a new generation of automatically controlled treatment plants and is based on the the latest knowledge from the field of waste water treatment. The functioning of the treatment plants and technical and qualitative parameters of the production heve been verified by the Technical and Testing Institute in Prague.
CHARACTERISTICS OF BIO-CLEANER TREATMENT PLANTS The BIO CLEANER plants are designed to deal with the smallest individual sources of sewage water, e.g. family houses, guest houses, etc. The new plants are replacing obsolete septic tanks both from the efficiency and financial viewpoint, and conform with today's living requirements. They allow cleaned waste water to be discharged from bathrooms, toilets, kitchens, washing machines, dishwashers. At the same time the cost of the water treatment is very low. Compared with previous models, the technical design of the BIO CLEANER WWTP allows you to manage unequal and discontinuous streams of waste water. The treatment plant is equipped with a trap to catch the floating impurities.
ENVI-PUR´s TECHNOLOGY Biological treatment is based on very low loading of activated sludge, resulting in the reduction in the total production of sludge. There is no need to heat the front end or septic tank during the winter. The treatment plant is driven by a diaphragm air pump with minimal energy consumption.
TECHNICAL DESIGN The BIO CLEANER's flexible design allows it to meet individual customers´ own requirements. The treatment plants are generally located below ground level but they can be installed above ground. Design use a cylindrical plastic tank, or the combination of a lined concrete tank. The new technology can also be installed inside a reconstructed septic tank or cesspool, which is sometimes a cost effective solution. The remaining space may be used as a reservoir for the treated water.
PREPARATION FOR INSTALLING THE BC 4
The BC 4 WWTP is 1600 mm deep. If it needs to be placed deeper, an additional plastic attachment is required. The WWTP must be installed on a concrete base 100 mm thick. The blower´s air hose is inserted via a plastic or steel tube having a minimum diameter of 60 mm. In exceptional cases the bottom of the tank. The plant can also be supplied with a removable wooden or laminate roof. The space around the WWTP can be filled with screened soil or concrete, following the installation instructions for filling or pouring concrete.
ELECTRICIAL INSTALLATION A 230 v junction box is required close to the control cabinet of the treatment plant, connected to its own circuit breaker 230 V / 1.5 A located in the main switchboard. An electrical connection is made between the electric cabinet and the diaphragmal blower, and the energy requirement is 130 W / 230 V.
Special types for:
- Cluster housing,
- Small hotels & Pubs.
- Villages and Small Towns.
- Schools and Colleges.
USE Purification of effluent from bathroom, Sink, WC, Washing Machine, Dishwasher etc.
SAVINGS
Electronically Controlled for pre-set programs of operation.
Programmes can be optimised for immediate or expected loading.
Assembly and commissioning are included in the purchase price.
MAINTENANCE The technology provides for Low production of sludge, which reduces the
necessity of frequent sludge removal.
The technology also removes floating impurities from the Clarifier.
TECHNOLOGY The purification of the technology is up to 98%.
The purified water can be used for watering your garden.
The purified leftover sludge can be composted.
ADVANTAGES
Existing Septic tanks can be converted into sewage treatment plants
through the installation of the Envi-pur technology.
This new type of the BIO CLEANER treatment plant is another important step in this technology. The BIO CLEANER waste water treatment plant proudly entered the new millennium. The BIO CLEANER family is a new generation of automatically controlled treatment plants and is based on the the latest knowledge from the field of waste water treatment. The functioning of the treatment plants and technical and qualitative parameters of the production heve been verified by the Technical and Testing Institute in Prague.
CHARACTERISTICS OF BIO-CLEANER TREATMENT PLANTS
The BIO CLEANER plants are designed to deal with the smallest individual sources of sewage water, e.g. family houses, guest houses, etc. The new plants are replacing obsolete septic tanks both from the efficiency and financial viewpoint, and conform with today's living requirements. They allow cleaned waste water to be discharged from bathrooms, toilets, kitchens, washing machines, dishwashers. At the same time the cost of the water treatment is very low. Compared with previous models, the technical design of the BIO CLEANER WWTP allows you to manage unequal and discontinuous streams of waste water. The treatment plant is equipped with a trap to catch the floating impurities.
ENVI-PUR´s TECHNOLOGY
Biological treatment is based on very low loading of activated sludge, resulting in the reduction in the total production of sludge. There is no need to heat the front end or septic tank during the winter. The treatment plant is driven by a diaphragm air pump with minimal energy consumption.
TECHNICAL DESIGN
The BIO CLEANER´S flexible design allows it to meet individual customers´ own requirements. The treatment plants are generally located below ground level but they can be installed above ground. Design use a cylindrical plastic tank, or the combination of a lined concrete tank. The new technology can also be installed inside a reconstructed septic tank or cesspool, which is sometimes a cost effective solution. The remaining space may be used as a reservoir for the treated water.
TECHNICAL DESCRIPTION BC 4 -15 P.E.
BC 4
bio cleaner
BC 8
bio cleaner
Volume of denitrification
0,50 m3
Volume of denitrification
0,60 m3
Volume of activation
1,10 m3
Volume of activation
1,40 m3
Volume of separation
0,19 m3
Volume of separation
0,37 m3
Area of separation
0,28 m2
Area of separation
0,50 m2
Water level height
1,15 m
Water level height
1,20 m
Total weight
150 kg
Total weight
165 kg
PREPARATION FOR INSTALLING THE BC 4
The BC 4 WWTP is 1600 mm deep. If it needs to be placed deeper, an additional plastic attachment is required. The WWTP must be installed on a concrete base 100 mm thick. The blower´s air hose is inserted via a plastic or steel tube having a minimum diameter of 60 mm. In exceptional cases the bottom of the tank. The plant can also be supplied with a removable wooden or laminate roof. The space around the WWTP can be filled with screened soil or concrete, following the installation instructions for filling or pouring concrete.
ELECTRICIAL INSTALLATION
A 230 v junction box is required close to the control cabinet of the treatment plant, connected to its own circuit breaker 230 V / 1.5 A located in the main switchboard. An electrical connection is made between the electric cabinet and the diaphragmal blower, and the energy requirement is 130 W / 230 V.
Parameters
BIO CLEANER
BOD5
25 mg/l
COD
90 mg/l
SS
25 mg/l
Parameters of Bio Cleaner
BIO CLEANER
BC4
BC8
BC12
BC15
Capacity
4 - 6 P.E.
8 - 10 P.E.
12 - 14 P.E.
15 - 20 P.E.
Flow rate waste water
0,6 m3/day
1,2 m3/day
1,8 m3/day
2,3 m3/day
Power input
80 W
80 W
80 W
130 W
Total weight
150 kg
165 kg
180 kg
230 kg
Diameter
1,4 m
1,6 m
1,7 m
1,9 m
AUTOMATIC OPERATION
The total operation of the waste water treatment plant (WWTP) (except for the blower running control) is controlled by a computer unit, installed in the electric cabinet of the WWTP. At the set time intervals it switches the solenoid valves which provide for necessary procedures and together with the possibility of oxygen volume regulation in the system they guarantee:
• the economical operation of the plant
• the possibility of changing the plant operation according to different inlet parameters
• the removal of any floating impurities
• minimum maintenance and manning of the plant
The control unit immediately signals a defect allowing a follow-up assessment and inspection of the plant.
• High quality cleaned water at a significantly lower price
Compared to the previous model, the ENVI-PUR BIO CLEANER system is much more economical. The quality parameters of the cleaned water allow it to be used as a source of fire-fighting water in mountainous areas or for watering parks, gardens and for street or road sprinkling. With the approval of the water authorities the cleaned water may be discharged into local storm water or sewerage drains. The usage of these plants is very advantageous especially in decentralized sewerage systems as local WWTPs. The systems may employ gravitational, pressure or vasuum methods of sewerage transfer.
• Technical parameters and quality have been tested and approved by the State Testing Laboratory • Total elimination of odour
• Reduction of excessive sludge production
• Low operating costs
• Minimum maintenance required
• Tradition and experience
.jpg)
